Welded Wire Mesh Machine in Rolls and Panels and Wire Diameter
This is a fully automated hooking machine, which saves more
manpower and time.
And This machine adopts synchronous control technique. The
cent-control and welding time are composed of PLC program system .
The input front-panel has two forms,touch screen and keyboard that
makes the machine more intelligent and reasonable and it could
press at one time, times welding . Welding by electromotor, the
hopper adopts the steeping motor; brake motor wheels,pulling the
wire net is controlled by the steeping motor . The line wire and
the weft wire are pre-straight and pre-cut . The greatest advantage
is you can adjust the distance of weft wire at random on the same
one piece wire mesh sheet.
Automatic wire feeding, the use of weft yarn surface positioning
device so that network does not need cutting-edge wire loss,
sub-sub-welding, to reduce the power loading as well as energy
Used for the fences, pouring floors, breeding for construction mesh
Welding wire diameter Φ 4-Φ 12(mm)
Welding mesh size 50× 50-200× 200(mm)
Welding width 600-2500(mm)
Speed of welding 60 times/min
Nominal voltage 380V 3 phase electric 50Hz
Nominal power 4KW
Exterior size 2500× 2700× 1500
|Width of mesh||1200-2500mm|
|Weft wire distance||25-200mm|
|Warp wire distance||50-200mm|
|Welding frequency||40-60 times/min|
|Need worker||1-2 person|
|Warp wire||Line disc|
|Weft wire||straightened cut wire|
|Welding points||12-32 points|
Application materials : welding machine is good at welding various
metal wire : stainless steel wire , low carbon steel wire , round
steel bar, ribbed steel bar
Application mesh panel : welded mesh panel widely used as reinforce
mesh panel for building, construction ;railway wire mesh fence,
security fence and others.
1,Straightening Automatically and Cutting Machine : two/set
2,Wire Tray :two piceses
Fence Mesh Welding Machine Function features and advantages:
1. This machine adopts electrical & electronic synchronous
control technique, both separate-phases welding and welding time
composed of digital and integrated electric circuit. The input
panel has two types touch screen and button, more intelligent and
rational, once pressing, and separate welding.
2. The welding power is electric power. The cross wire is fed from
hopper driven by stepper motor, and the line wire is fed by brake
motor driven car and the mesh is pulled by the stepper motor driven
3. The cross and the line wires are both pre-straightened and
pre-cut by the special straightening and cutting machine.
4. The biggest advantage of the machine is that there is different
cross spacing in the same mesh.
5.The welding electrodes and transformer are equipped with the
water cooling system,thus prolong the machine life and working